Do You Know How To Do After Cutting The Flex Neon?
Do You Know How To Do After Cutting The Flex Neon?
-Flex Neon Instruction
If you buy some neon light,and you want to make some shapes or letters,maybe you need to cut it by yourself.
B:Our flex neon like this:
A:How can i cut it?
B:Sure,our neon tube can be cut like this:
You can cut along the black point on the side of led strip,pls note DO NOT cut optionally to avoid damage to led strip
A:After cutting,how to make it waterproof as before?
B:Yes,you can use the slicone tube as belows:
Without any connector:
With the connector:2/3/4/5pins is same
Put the wires into the cap and then thread the line in the direction of the arrow
Solder the connector to the bare PCB and coat the section with glue uniformly then insert the cap.
You can use the dry the plug with hot wind or natural wind until make sure the installation is firm
If not,you need to let it stand for 2-3hours removable.
B:Oh,we normally use the 30mm length aluminum clip to fix it:You can customized the length of clip
A:Whether can i bend it any angle?
B:No No No,you can not bend the tube go as you please,they have the bend angle:
- Side view emitting:Do not bend upward and downward.
2.Front Emitting:Do not bend toward the left and right.
3.No matter what type neon tube,pls do not do that.
- The normal bend diameter we suggest:
The bend and package diameter is based on the different size,if you place order,we will send the exact diameter for you.
More product details pls check:www.witop-tech.com
