WS2812B RGB LED Matrix
WS2812B SK6812 RGB LED Matrix Panel
WS2812B Flexible LED Pixel Panel
1-WS2812B 3 Pin LED installed 16*16Pixel..8*8Pixel.
2-Only Black PCB Color,flexible PCB that can be gently bent and curred afound surface.
3-DC5V inputted, donnot exceed DC6V or short circuit,nopolarity prodect.
4-3Pin JST sm connector soldered 2 extra wire for powering
5-Nowaterproof IP62
6-Controller:SD controller,micro controller such as Arduino
7- being able to individually control each LED.
Share This Product
Product Details
Features
WS2812B Flexible LED Pixel Panel
It’s a bendable, flexible LED Matrix pannel! Control all ultra-bright LEDs using a single microcontroller pin,
set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB
backing that can be gently bent and curved around surfaces. This big panel use the completely same
WS2812B LED diode with the WS2812B LED pixel strip,so you can use this matrix just like any other
WS2812B LED Pixel-compatible product.
The LED Matrix are placed 32 Pixels each line, and there are 8 lines on each panel. The space between each pixel is 1cm.
Specifications
8*8 RGB LED Matrix WS2812B – DC 5V 60 LED Strip Flexible control Panel
Applications
-
1,Full color led string light,led full color module,led super hard and soft lights,led guardrail tube,led apperance/scene lighting led pixel screen,a variety of electronic products.
2,The excellent light and user-friendly designs make LE D strip perfect for numerous applications, i.e cove lights, backlights, cabinet lights, edge light, architectu ral lights for corridor, canopy, archway, lights for path and contour marking; etc.
3,They can be a good choice for lights for hotels, restau rants, night clubs, coffee / wine bars, shopping malls,various shops,
cinemas, beauty centers, office fronts, ev en lights for household kitchens or living rooms, etc.
Notes
- Please read the specifications and precautions carefully before installation
- Please do not use nails or sharp instruments to intall led strip on the object, use double-sided tape or glue or wall mounted on plywood
- Fixed led strip, you can not use acidic glue, it is recommended to use a neutral glue.
- This product is a constant voltage DC5V, make sure Power is right before installation, after installation, check the wiring is
- correct or not , so that avoid the product been burned
- This product is recommended use in parallel. when the length is more than five meters, the tail so be power to ensure the brightness is enough or uneven
Contact Us
